Maytag Commercial MHN33PRCWW Installation Manual Page 11
- Page / 32
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
11
CODE EXPLANATION
6 07
NORMAL REGULAR CYCLE PRICE
NORMAL (Factory Default)
6
6
07
00
g
Represents the number of quarters (coin 1); may
adjust from 0–200. (See VALUE OF COIN 1.) Increase
from 0–200 by pressing the
UPPER LEFT
key pad
and decrease by pressing LOWER LEFT key pad.
Factory default of 7 quarters = $1.75.
PR MODELS ONLY: Factory default of 0 quarters.
6 01 setting would represent one coin slide
actuation.
Press the
LOWER MIDDLE
key pad once to advance
to next code.
6 07
DELICATES REGULAR CYCLE PRICE
DELICATES (Factory Default)
6
6
07
00
g
Represents the number of quarters (coin 1); may
adjust from 0–200. (See VALUE OF COIN 1.) Increase
from 0–200 by pressing the
UPPER LEFT
key pad
and decrease by pressing LOWER LEFT key pad.
Factory default of 7 quarters = $1.75.
PR MODELS ONLY: Factory default of 0 quarters.
6 01 setting would represent one coin slide
actuation.
Press the
LOWER MIDDLE
key pad once to advance
to next code.
6 07
POWER WASH REGULAR CYCLE PRICE
POWER
WASH
(Factory Default)
6
6
07
00
g
Represents the number of quarters (coin 1); may
adjust from 0–200. (See VALUE OF COIN 1.) Increase
from 0–200 by pressing the
UPPER LEFT
key pad
and decrease by pressing LOWER LEFT key pad.
Factory default of 7 quarters = $1.75.
PR MODELS ONLY: Factory default of 0 quarters.
6 01 setting would represent one coin slide
actuation.
Press the
LOWER MIDDLE
key pad once to advance
to next code.
7 11
WASH LENGTH
7
11
g
This is the number of minutes for WASH. Washer
comes from the factory preset with 11 minutes.
Choose from 9–17 minutes by pressing the
LOWER
LEFT
key pad.
Press the
LOWER MIDDLE
key pad once to advance
to next code.
8 00
EXIT SERVICE MODE
8 00
g
Use this field to exit Service Mode when entered via
the key dance.
Press and hold LOWER LEFT to exit Service Mode.
9 00
CYCLE COUNTER OPTION
This option is either SELECTED ‘ON’ or NOT
SELECTED ‘OFF’.
9
9
00
0C
g
Not Selected ‘OFF’.
Selected ‘ON’ and not able to be deselected.
Press the LOWER RIGHT key pad 3 consecutive
times to select ‘ON’. Once selected ‘ON’ it cannot
be deselected.
Press the
LOWER MIDDLE
key pad once to advance
to next code.
CODE EXPLANATION
1. 00
MONEY COUNTER OPTION
This option is either SELECTED ‘ON’ or NOT
SELECTED ‘OFF’.
1.
1.
1
00
0C
C0
g
Not Selected ‘OFF’.
Selected ‘ON’.
Press the LOWER RIGHT key pad 3 consecutive
times to select ‘ON’ and 3 consecutive times to
remove (Not Selected ‘OFF’.) Counter resets by
going from ‘OFF’ to ‘ON’.
Selected ‘ON’ and not able to be deselected.
To select ‘ON’ and not able to be deselected,
first select ‘ON’, then within 2 seconds, press
the LOWER RIGHT key pad twice,
LOWER LEFT key
pad
once, and exit the set-up mode.
Press the
LOWER MIDDLE
key pad
once to advance
to next code.
2. 00
SPECIAL PRICING OPTIONS
This option is either SELECTED ‘ON’ or NOT
SELECTED ‘OFF’.
2.
2.
00
SP
Not Selected ‘OFF’, and next available code will be
A.00.
Selected ‘ON’. Press the UPPER RIGHT key pad
once for this selection.
NOTE: If SPECIAL PRICING OPTION is selected, there is
access to codes ‘3.XX’ through ‘9.XX’.
g
Press the
LOWER MIDDLE
key pad once to advance
to next code.
Options to use if SPECIAL PRICING is selected:
3. 07
NORMAL SPECIAL CYCLE PRICE
NORMAL
3.
3
07
00
g
Represents the number of quarters (coin 1);
may adjust from 0–200. (See VALUE OF COIN 1.)
Increase from 0–200 by pressing the
UPPER LEFT
key pad and decrease by pressing LOWER LEFT key
pad. Factory default of 7 quarters = $1.75.
PR MODELS ONLY: Factory default of 0 quarters.
Press the
LOWER MIDDLE
key pad once to advance
to next code.
3. 07
DELICATES SPECIAL CYCLE PRICE
DELICATES
3.
3
07
00
g
Represents the number of quarters (coin 1);
may adjust from 0–200. (See VALUE OF COIN 1.)
Increase from 0–200 by pressing the
UPPER LEFT
key pad and decrease by pressing LOWER LEFT key
pad. Factory default of 7 quarters = $1.75.
PR MODELS ONLY: Factory default of 0 quarters.
Press the
LOWER MIDDLE
key pad once to advance
to next code.
3. 07
POWERWASH SPECIAL CYCLE PRICE
POWER WASH
3.
3
07
00
g
Represents the number of quarters (coin 1);
may adjust from 0–200. (See VALUE OF COIN 1.)
Increase from 0–200 by pressing the
UPPER LEFT
key pad and decrease by pressing LOWER LEFT key
pad. Factory default of 7 quarters = $1.75.
PR MODELS ONLY: Factory default of 0 quarters.
Press the
LOWER MIDDLE
key pad once to advance
to next code.
- INSTALLATION INSTRUCTIONS 1
- INSTRUCTIONS D’INSTALLATION 1
- TABLE OF CONTENTS 2
- TABLE DES MATIÈRES 2
- WASHER SAFETY 3
- INSTALLATION REQUIREMENTS 4
- Drain System 5
- Location Requirements 5
- INSTALLATION 6
- Connect the Inlet Hoses 7
- Connect the Drain Hose 8
- Secure the Drain Hose 8
- Level the Washer 9
- Complete Installation 9
- General User Information 10
- Control Set-up Procedures 10
- Start Operating Set-up 10
- WASHER CARE 14
- ASSISTANCE OR SERVICE 15
- WASHERS AND DRYERS WARRANTY 16
- SÉCURITÉ DE LA LAVEUSE 17
- EXIGENCES D’INSTALLATION 18
- Exigences d’emplacement 19
- Options 19
- Système de vidange 20
- Spécifications électriques 20
- INSTRUCTIONS 21
- D’INSTALLATION 21
- Raccordement des tuyaux 22
- /2" 23
- (114 mm) 23
- Achever l’installation 24
- Informations générales 25
- Procédures de réglage 25
- COOL (froide) 28
- WARM (tiède) 28
- HOT (chaude) 28
- Tableau 1 29
- ENTRETIEN DE LA 30
- ASSISTANCE OU 31
- MULTI-CHARGE PAYANTES MAYTAG 32
Related products and manuals for Washing machines Maytag Commercial MHN33PRCWW
(40 pages)
© 2020, manymanuals.com. All rights reserved. | 1.055 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals